oil change near me

How to Perform Your Own Oil Change: A Step-by-Step Guide

Performing your own oil change is a practical skill that can save you money and help you understand your vehicle better. This guide will walk you through the process, ensuring you can complete this task safely and efficiently.

What You’ll Need

  1. New Oil: Check your vehicle’s manual for the recommended type and amount.
  2. New Oil Filter: Make sure it’s the correct model for your car.
  3. Wrench Set: For removing the drain plug.
  4. Oil Filter Wrench: To remove the old oil filter.
  5. Oil Pan or Bucket: To catch the old oil.
  6. Funnel: For adding new oil.
  7. Rags and Gloves: To keep your hands clean and protect them.
  8. Jack and Jack Stands or Ramps: To lift the car safely.

Safety First

Before you start, ensure your car is parked on a level surface and the engine is cool. Use the parking brake for added safety.

Step 1: Prepare Your Vehicle

Lift your car using a jack and secure it with jack stands or drive it onto ramps. Never rely solely on a jack to support the vehicle while you’re working under it.

Step 2: Drain the Old Oil

Place your oil pan under the oil drain plug. Loosen the plug with a wrench, then remove it by hand, allowing the oil to drain out. Be cautious, as the oil may be hot. Wait until the oil flow slows to a drip.

Step 3: Replace the Oil Filter

Move your oil pan beneath the oil filter. Use an oil filter wrench to loosen and remove the old filter. Before installing the new filter, apply a little oil to the new filter’s gasket to ensure a good seal. Screw on the new filter by hand.

Step 4: Add New Oil

Find your vehicle’s oil filler cap on top of the engine. Remove it and place a funnel in the opening. Pour in the recommended amount and type of new oil. Replace the cap.

Step 5: Check Oil Level

Start your vehicle and let it run for a minute. This circulates the new oil. Turn off the engine and wait a few minutes for the oil to settle. Use the dipstick to check the oil level, ensuring it’s within the recommended range.

Step 6: Clean Up and Dispose of Old Oil

After confirming there are no leaks, lower your vehicle. Take the old oil to a recycling center or an auto parts store that accepts used oil.


Changing your own oil is a rewarding experience that can give you a sense of accomplishment and save you money. Always refer to your vehicle’s manual for specific recommendations and follow all safety precautions. Happy wrenching!

Leave a Comment

Your email address will not be published. Required fields are marked *

Shopping Cart
Days :
Hours :
Minutes :
oil change near me